EPA Phase 2 Outdoor Stoves

Crown Royal has proudly released the newest member of the Crown Royal Stove family. Manufactured with the highest required standards in mind, their EPA Phase II stove is their cleanest burning unit available. The RS7400E has an approximate range of 320,000 BTU's and estimated heating capacity of 8,000 to 10,000 sq. ft. The RS7400E is one of the largest EPA Phase II units available on the market today.

The Crown Royal Difference

You have a wide range of outdoor wood burning stove manufacturers to choose from. Are you comparing all the features and advantages before deciding to buy? Before making that decision, please check out why we went with the CROWN ROYAL difference.

20 YEAR LIMITED WARRANTY - Some outdoor wood burning stove manufactures offer little to no warranty and are usually limited to 10 years. CROWN ROYAL offers a 20 year limited warranty on ALL stoves we manufacture.

TYPE 409 STAINLESS STEEL - 409 10 gauge stainless steel is superior to mild steel and others stainless steel grades in terms of thermal expansion properties, along with better corrosion resistance than mild steel. Competitors using mild steel need at least 3/8"" or 1/2"" to get the same corrosion control and by doing that lose heat transfer efficiency.

FULLY ENCLOSED OUTDOOR WOOD BURNING STOVES - All CROWN ROYAL outdoor stoves are fully enclosed. Many manufacturers do not have floors which results in rodents and other animal problems that will damage the stove, wiring, and R Value of the furnace. *Excludes Indoor Units

RESEARCH, DEVELOPMENT, AND TESTING - What better location to develop and test an Outdoor Wood Burning Stove than International Falls, Minnesota, with the coldest temperatures in the continental United States. All Crown Royal Stoves undergo a 24 hour pressure test after final assembly, before shipment. All manufacturing is performed at our International Falls plant.

EPA APPROVED OUTDOOR STOVES - Along with our complete line of traditional models, CROWN ROYAL has also developed and sells EPA Approved units that fall far below the EPA requirements for smoke emission standards, with the current 7400E, and the 7300E that is waiting for formal approval. These units are a great option for those people that live in areas with restrictions.

INDOOR UNITS - Our indoor units are made with the same high quality standards as our traditional models, but give end users the option to put them inside a garage or barn.

THE CROWN ROYAL ADVANTAGE - Our stoves are designed to be very user friendly & easy to maintain. They have the "ORIGINAL" Shaker Grate System, easy ash removal, pull out ash pan, easy access rear door for seamless installation and maintenance, large firebox door for easy loading of unsplit wood, and heat transfer tubes for more square feet of heating capacity. Our stoves are UL approved to burn WOOD, COAL, AND CORN, giving end users the choice to heat with multiple fuels. The stoves are also equipped with a turbo draft system equipped with two blowers - primary and secondary. This system provides the following advantages: burns secondary gases, burns a hotter fire, provides much more heat transfer, higher efficiencies, burns less wood, faster heat recovery, less ashes and low smoke emissions. With all of the advantages we have the best performing, highest quality stove on the market!


Estimated Weight 3200 lbs.
Width 54"
Length 81"
Height 86 1/2"
Wood Length 34"
Chimney Size 6"
Door Size 22"x26"
Supply Size 2-1 1/4"
Return Size 2-1 1/4"
Approximate Water Capacity 400 gallons
Fan Capacity 150 cfm
Approximate Square Feet 7,000 - 8,000
Approximate BTUs 300,000
Insulation Walls R 30
Insulation Roof R 40
409 Stainless Steel Yes